摘要
目的 研究聚丙烯酸树脂Eudragit EPO游离膜的机械性质，考察其影响因素。方法 采用拉伸实验评价游离膜的机械性质，测定抗张强度（σ）、断裂拉伸率（ε）与弹性模量；同时计算相关参数：抗张强度和弹性模量的比值（σ/E）、相对表面能(σ2/2E)、断裂功（W）。结果 抗张强度（σ）、断裂拉伸率（ε）、弹性模量、抗张强度和弹性模量的比值（σ/E）、相对表面能(σ2/2E)、断裂功（W）等参数可以从不同方面评价膜的机械性质。成膜温度、膜厚度和增塑剂浓度显著地影响到聚丙烯酸树脂Eudragit EPO游离膜的机械性质，而成膜时间对游离膜的各项机械学性质影响不大。结论 这些研究可以对包衣工艺和处方筛选提供参考。
Abstract
OBJECTIVE To study the mechanical properties of film from acrylic polymer Eudragdit EPO which was prepared by a casting method. METHODS Tensile testing was used to determine tensile strength(σ)， tensile strain at break (ε) and modulus of elasticity of the film(E). The ratio of tensile strength to tensile strain at break(σ/E)， relative surface energy (σ2/2E)， work at break(W) were calculated. RESULTS Parameters as σ，ε，E， σ/E， σ2/2E and W was used to evaluate mechanical properties of film from acrylic polymer Eudragdit EPO.CONCLUSION The drying temperature， film thickness and concentration of plasticizer affected the mechanical properties of film significantly， while the film-formation time did not. The study might be helpful for coating process and formulation screen.
关键词
聚丙烯酸树脂 /
Eudragit EPO /
游离膜 /
机械性质
{{custom_keyword}} /
Key words
KEY WORDS: acrylic polymer /
Eudragit EPO /
free film /
mechanical properties
{{custom_keyword}} /
张筱红 曹心珂 李轶群 陈东 丁平田.
聚丙烯酸树脂Eudragit EPO游离膜机械性质的研究[J]. 中国药学杂志, 2010, 45(2): 128-131
ZHNG Xio-hong;CO Xin-ke;LI Yi-qun;CHEN Dong;DING Ping-tin.
Mechanical Properties of Film from Acrylic Polymer Eudragdit EPO[J]. Chinese Pharmaceutical Journal, 2010, 45(2): 128-131
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
［1］ ZHENG J M. The Process and Mechanism of Tablets Coating(片剂的包衣工艺和原理)［M］. Beijing: Chinese Medical Science and Technology Press，2001:283-284.
［2］ PARIKH N H， PORTER S C， ROHERA B D. Tensile properties of free films cast from Aqueous Ethylcellulose Dispersions［J］. Pharm Res，1993， 10(6):810-815.
［3］ FROHOFF-ZHULSMANN M A， LIPPOLD B C， MCGINITY J W. Aqueous ethyl cellulose dispersions containing plasticizers of different water solubility and hydroxypropyl methyl-cellulose as coating material for diffusion pellets:ⅡProperties of sprayed films［J］. Eur J Pharm Biopharm，1999， 48（1）:67-75.
［4］ ZHANG L C，HU J H，LI Z， et al. Mechanical properties and permeability of controlled-release films prepared by different techniques ［J］.Chin J Pharm（中国医药工业杂志），2002，33（1）：19-22.
［5］ HYPPOLA R， HUSSON I， SUNDHOLM F. Evaluation of physical properties of plasticized ethyl cellulose films cast from ethanol solution PartⅠ［J］.Int J Pharm， 1996，133(1-2):161-170.
［6］ ROWE R C. A reappraisal of the equations used to predict the internal stresses of film coatings applied to tablet substrates［J］. Pharm Pharmacol, 1983，35(2): 112-113.
［7］ OKHAMZAFE A O， YORK P. Stress crack resistance of some pigmented and unpigmented tablet film coating systems［J］.Pharm Pharmacol, 1985， 37(7):449-454.
［8］ ZHANG L C，HU J H，LI Z，et al. Optimization of plasticizers in free coating membranes of osmotic acrylic resin Eudragit RS 100［J］. Acta Pharm Sin（药学学报），2001，36（12）：937-941.
［9］ GOODHART F W， HARRIS M R. An evaluation of aqueous film-forming dispersions for controlled release［J］.Pharm Technol， 1984， 8(4): 64-71.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(717 KB)
