摘要
目的 解决《中国药典》2010年版中甲基纤维素动力黏度测定法中存在的问题。 方法 本实验采用同轴圆筒式旋转流变仪考察了剪切速率、测定温度、屈服值和触变性等对样品流变学性质的影响,确定了测定样品的最佳温度和剪切速率。 结果 通过实验确定测定温度为(20±0.1) ℃,剪切速率为80 s-1。 结论 该方法简便、准确、重现性好,适用于甲基纤维素黏度的测定。
Abstract
Objective To solve the existing problems of the determination method of dynamic viscosity of methylcellulose in Chinese Pharmacopoeia(2010 edition). METHODS By virtue of concentric cylinder rheometer,the experiment probes into the influence of shear rate,temperature measurement,the yield value,thixotropic,etc. on the rheological properties of samples,and identifies then the optimum temperature and shear rate of the samples. RESULTS The optimum conditions were established as temperature of(20±0.1) ℃ and shear rate of 80 s-1. CONCLUSION This method is simple and accurate with good repeatability. It can be applied to determine the viscosity of methylcellulose.
关键词
甲基纤维素 /
动力黏度 /
旋转流变仪
{{custom_keyword}} /
Key words
methylcellulose /
dynamic viscosity /
concentric cylinder rheometer
{{custom_keyword}} /
陈燕平,王林波,邵泓,陈钢*,陈桂良.
甲基纤维素动力黏度测定方法的研究[J]. 中国药学杂志, 2013, 48(5): 385-387 https://doi.org/10.11669/cpj.2013.05.013
CHEN Yan-ping, WANG Lin-bo, SHAO Hong, CHEN Gang*, CHEN Gui-liang.
Determination Method of Dynamic Viscosity of Methylcellulose[J]. Chinese Pharmaceutical Journal, 2013, 48(5): 385-387 https://doi.org/10.11669/cpj.2013.05.013
中图分类号:
R917
{{custom_clc.code}}
({{custom_clc.text}})
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Ch.P(2010)VolⅡ(中国药典2010年版.二部)[S].2010:1191.
[2] ROWE R C,SHESKEY P J,WELLER P J. Handbook of Pharmaceutical Excipients(药用辅料手册)[M]. 4th ed. Beijing:Chemical Industry Press,2004:446-450.
[3] ANONYMOUS. Final report on the safety assessment of hydroxyethylcellulose,hydroxypropylcellulose,methylcellulose,hydroxypropyl methylcellulose and cellulose gum. J Am Coll Toxicol,1986,5(3):1-60.
[4] CHEN Y P,WANG L B,SHAO H,et al. Determination of dynamic viscosity of ethylcellulose.Chin J Pharm (中国医药工业杂志),2011,42(8): 622-624.
[5] USP(33)-NF(28)[S].2010:504-505.
BP(2009)[S].2009:1337-1339.
Ph.Eur.(5.0)[S].2005:2016.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}