目的 通过提取、浸出及稳定性实验全面考察热毒宁注射液与其包装材料低硼硅玻璃安瓿的相容性。方法 首先采用酸性及碱性溶剂对低硼硅玻璃安瓿进行提取,采用电感耦合等离子体质谱仪(ICP-MS)及等离子体发射光谱仪(ICP-OES)检测提取液中的金属元素,采用扫描电子显微镜(SEM)法检测玻璃安瓿内表面可能存在的脱片;然后采用同样的检测方法对热毒宁注射液进行检测,并考察稳定性的影响。结果 低硼硅玻璃安瓿提取、浸出实验中可检出33种元素;热毒宁注射液及其稳定性考察样品中各元素均远低于PDE限度值;包装材料内表面均无明显脱片现象。结论 热毒宁注射液与低硼硅玻璃安瓿瓶相容性较好,在产品说明书贮藏条件下保存,产品有效期内质量稳定,安全可控。
Abstract
OBJECTIVE To investigate the compatibility of Reduning injection and lowborosilicate glass ampoule through the elemental analysis of extractables and extracts of Reduning injection products and the analysis of the debonding of the inner surface of glass packaging materials. METHODS Firstly, the low borosilicate glass ampoules were extracted by acid and alkaline solvent. The metal elements in the extract were detected by inductively coupled plasma mass spectrometry (ICP-MS) and plasma emission spectrometry (ICP-OES) and scanning electron microscope(SEM) method for detecting possible splitting on the inner surface of glass ampoules, then the same method was used to detect Reduning injection, and the effect of stability was investigated. RESULTS Thirty-three elements were detected in the extraction and leaching experiments of low borosilicate glass ampoules; all elements in Reduning injection and its stability test samples were far below the PDE limit; no obvious flaking phenomenon was observed on the inner surface of packaging materials. CONCLUSION Reduning injection has good compatibility with low borosilicate glass ampoules. It is preserved under the storage conditions of the product manual. The quality of the product is stable within the validity period, safe and controllable.
关键词
热毒宁注射液 /
低硼硅玻璃安瓿 /
相容性
{{custom_keyword}} /
Key words
Reduning injection /
Low Borosilicate glass ampoule /
compatibility
{{custom_keyword}} /
中图分类号：
R944
R917
{{custom_clc.code}}
({{custom_clc.text}})
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] LI Y, HE R L, ZHAO X, et al. Compatibility study between glass infusion bottles and sodium bicarbonate injection [J]. Chin Pharm J(中国药学杂志), 2019, 54(1): 63-70.
[2] XIONG W, DING G, WANG Q, et al. Compatibility evaluation of the ganciclovir and and sodium bicarbonate injection [J]. Chin J Mod Appl Pharm(中国现代应用药学),2018, 35(8):52-58.
[3] TANG J, ZHU X L, ZHANG H S. Determination of the trace elements in ibuprofen injection of the compatibility study on packaging materials by microwave digestion-ICP-AES [J]. Chem Eng (化学工程师), 2018, 32(4): 30-32.
[4] TANG J. Determination of lead, cadmium, arsenic and antimony in ibuprofen injection of drug compatibility study [J]. Chem Anal Met (化学分析计量), 2018, 27(2): 76-79.
[5] JIANG Y, CHENG F Y. Study on the compatibility of vitamin C injection and packing material [J]. Heilongjiang Med J (黑龙江医药), 2016, 29(2):242-245.
[6] LI Y, ZHANG Y L. Delamination propensity of pharmaceutical glass containers treated with different extraction media by accelerated testing [J]. Chin J Pharm (中国医药工业杂志), 2015, 46(3):293-298.
[7] LI Y, ZHANG Y L. Research status of the inner surface durability of glass containers for pharmaceutical use [J]. Chin J Pharm (中国医药工业杂志), 2014, 45(12):1186-1191.
[8] FANG M, QU Y N, XU H. Analysis on the compatibility between pharmaceutical glass container and injection [J]. China Med Dev Inf(中国医疗器械信息), 2017,23(9):28-29.
[9] YANG Q, ZHOU Y Y, DING Y Q, et al. Study on compatibility of neutral borosilicate glass ampoule and Qingkailing Injection [J]. Eval Anal Drug-Use Hosp China(中国医院用药评价与分析), 2018, 18(12):32-39.
[10] HUANG W Z, DENG M, ZHANG Q M. Compatibility between Compound Fengshining Injection and low borosilicate glass ampoule [J]. Pharm Today (今日药学), 2016,26(2):95-99.
[11] ZHANG L M, YAN Z J, YANG B, et al. Compatibility study of inner surface of anatomy bottle and caffeine citrate injection [J]. J China Pharm(中国药房), 2018,29(5):644-647.
[12] PAN X E, ZHANG Y F, ZHANG C H, et al. Evaluating compatibility between propofol injection and neutral borosilicate glass ampoule [J]. China Meas Test(中国测试), 2017,43(5):45-58.
[13] YAO Y, XU X W, CHEN W L. On the relation between glass ampoule and the quality of lidocaine hydrochloride injection [J]. Chin Pharm Aff (中国药事),2017,31(6):631-641.
[14] SFDA. Technical Guidelines for research on compatibility between chemical injection and pharmaceutical glass packaging containers (trial)[S]. 2015.
[15] SFDA. Standard for Direct Contact with Pharmaceutical Packaging Materials and Containers (trial) YBB00142002(药品包装材料与药物相容性实验指导原则)[S]. 2002.
[16] Ch.P(2015) Vol Ⅳ(中国药典2015年版.四部)[S]. 2015:232.
[17] Technical guidelines for the study of compatibility between chemicals and elastomer Seals, Promulgated by the National Medical Products Administration[S]. 2016.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(1109 KB)
