固体制剂中多孔粉体的制备及应用研究进展

朱卫丰, 朱琳, 明良山, 管咏梅, 陈丽华, 李哲

中国药学杂志 ›› 2021, Vol. 56 ›› Issue (8) : 613-619.

PDF(1497 KB)
PDF(1497 KB)
中国药学杂志 ›› 2021, Vol. 56 ›› Issue (8) : 613-619. DOI: 10.11669/cpj.2021.08.001
综述

固体制剂中多孔粉体的制备及应用研究进展

  • 朱卫丰, 朱琳, 明良山*, 管咏梅, 陈丽华, 李哲*
作者信息 +

Preparation and Application of Porous Powder in Solid Preparations

  • ZHU Wei-feng, ZHU Lin, MING Liang-shan*, GUAN Yong-mei, CHEN Li-hua, LI Zhe*
Author information +
文章历史 +

摘要

固体制剂作为最常用的给药形式,对制剂原料及产品均有较高的要求。多孔粉体具有相对密度低、孔隙率和比表面积大、渗透性和吸附性好等特点,对制剂过程及终产品具有显著影响。多孔粉体的制备工艺及多孔结构类型对其性质有一定的影响,从而影响其在药物固体制剂中的应用。因此,基于近年来国内外的相关研究,笔者综述了固体制剂中多孔粉体的制备方法、分类及其应用,为后续多孔粉体的研究及其在药物制剂中的进一步广泛应用奠定了良好的研究基础。

Abstract

As the most commonly used form of administration, solid preparations have higher requirements for preparation materials and products. The porous powder exhibits the characteristics of low relative density, large porosity and specific surface area, good permeability and adsorption, etc., which have significant impact on the preparation process and the final product. The preparation process and porous structure type of porous powder have a certain influence on their properties, thereby affecting their application in solid pharmaceutical preparations. Therefore, based on the relevant research at home and abroad in recent years, this paper summarized the preparation methods, classification and application of porous raw materials in pharmaceutical solid preparations, which lais a good research foundation for the subsequent research of porous powder and their further wide application in pharmaceutical preparations.

关键词

固体制剂 / 多孔粉体 / 制备 / 分类 / 应用

Key words

solid preparation / porous powder / preparation / classification / application

引用本文

导出引用
朱卫丰, 朱琳, 明良山, 管咏梅, 陈丽华, 李哲. 固体制剂中多孔粉体的制备及应用研究进展[J]. 中国药学杂志, 2021, 56(8): 613-619 https://doi.org/10.11669/cpj.2021.08.001
ZHU Wei-feng, ZHU Lin, MING Liang-shan, GUAN Yong-mei, CHEN Li-hua, LI Zhe. Preparation and Application of Porous Powder in Solid Preparations[J]. Chinese Pharmaceutical Journal, 2021, 56(8): 613-619 https://doi.org/10.11669/cpj.2021.08.001
中图分类号: R944   

参考文献

[1] YAN H M, DING D M, WANG J, et al. Compared with colloidal silica and porous silica as baicalin solid dispersion carrier[J]. China J Chin Mater Med(中国中药杂志), 2014, 39(13):2484-2488.
[2] LUO W, GENG Z, LI Z, et al. Controlled and sustained drug release performance of calcium sulfate cement porous TiO2 microsphere composites[J]. Int J Nanomed, 2018, 13:7491-7501.
[3] GONG T, SONG X, YANG L, et al. Spontaneously formed porous structure and M1 polarization effect of Fe3O4 nanoparticles for enhanced antitumor therapy[J]. Int J Pharm, 2019, 559:329-340.
[4] BLAESI A H, SAKA N. 3D-micro-patterned fibrous dosage forms for immediate drug release[J]. Mater Sci Eng C Mater Biol Appl, 2018, 84:218-229.
[5] SHEN Y M. Preparation and evaluation of Huang Qi Sheng Mai fast released preparations[D]. Hangzhou: College of Pharmaceutical Sciences Zhejiang University of Technology, 2016.
[6] LI J, LUO Y, RUAN H, et al. Study on improvement and mechanism of tableting properties of porous fagopyrum dibotrys powders[J]. China J Chin Mater Med(中国中药杂志), 2020, 45(22):5518-5524.
[7] BO D Y. Preparation of PLLA Dual-drug System Scaffold and Application for GBR in Periodontal Treatment[D]. Guangzhou: Jinan University, 2016.
[8] JIANG H, ZHANG D K, HAN X, et al. Research progress of solid dispersion of porous material as carrier to improve the dissolution rate of poorly water-soluble drugs[J]. Chin Pharm J(中国药学杂志), 2017, 52(17):1477-1482.
[9] LI C X, CENG R, QIAN Y, et al. Initial study on preparation and properties of porous Bletilla striata polysaccharides gum[J]. Chin Tradit Herb Drugs(中草药), 2017, 48(20):4245-4252.
[10] ESQUIVEL-CASTRO T A, IBARRA-ALONSO M C, OLIVA J, et al. Porous aerogel and core/shell nanoparticles for controlled drug delivery: a review[J]. Mater Sci Eng C Mater Biol Appl, 2019, 96:915-940.
[11] CHEN J, WANG Y, LIU J, et al. Preparation, characterization, physicochemical property and potential application of porous starch: a review[J]. Int J Biol Macromol, 2020, 148:1169-1181.
[12] HUANG H, DU M, CHEN J, et al. Preparation and characterization of abalone shells derived biological mesoporous hydroxyapatite microspheres for drug delivery[J]. Mater Sci Eng C Mater Biol Appl, 2020, 113:110969.
[13] ZHOU M, WANG Y, WU F, et al. Development on porous particles of Pueraria lobatae Radix for improving its compactibility and dissolution[J]. Rsc Adv, 2018, 8(43):24250-24260.
[14] BAUDRON V, GURIKOV P, SMIRNOVA I, et al. Porous starch materials via supercritical-and freeze-drying[J]. Gels (Basel, Switzerland), 2019, 5(1):12.
[15] LEUNG S S, WONG J, GUERRA H V, et al. Porous mannitol carrier for pulmonary delivery of cyclosporine A nanoparticles[J]. AAPS , 2017, 19(2):578-586.
[16] ZHOU L, WU F Q, LUO Z K, et al. Preparation and properties research of porous drug-delivery nano-hydroxy apatite/polyamide/chitosan composite materials[J]. Chem Res Appl, 2017, 29(1):89-93.
[17] LOREANA G, VERÓNICA R R, VERÓNICA B. Development of porous spray-dried inhalable particles using an organic solvent-free technique[J]. Powder Technol, 2019, 342:642-652.
[18] CAO Z B. Self-assembling of silk frbroin and its application in biomedicine[D]. Shanghai: Fudan University, 2005.
[19] GE YY, PENG Q, YU Y S. Preparation of graphene/konjac glucomannan porous xerogel and study on its ad-sorption and drug release properties for 5-fluorouracil[J]. Northwest Pharm J(西北药学杂志), 2020, 35(3):413-417.
[20] HU G L, LI Y M, XIAO M, et al. Research on physical and chemical properties of gelatin-bletilla/Salvia-miltiorrhiza as porous material[J]. J Hubei Univ Tradit Chin Med(湖北中医药大学学报), 2013, 15(4):3-6.
[21] LI B, ZHENG X C, CHEN L B, et al. Preparation and characterization of porous chitosan microspheres[J]. J Nanjing Univ(Nat Sci)(南京大学学报:自然科学版), 2010, 46(2):186-191.
[22] OGIENKO A G, BOGDANOVA E G, TROFIMOV N A, et al. Large porous particles for respiratory drug delivery. Glycine-based formulations[J]. Eur J Pharm Sci, 2017, 110:148-156.
[23] YIN F, GUO S, GAN Y, et al. Preparation of redispersible liposomal dry powder using an ultrasonic spray freeze-drying technique for transdermal delivery of human epithelial growth factor[J]. Int J Nanomed, 2014, 9:1665-1676.
[24] HE R H. Preparation and Application of Ultrafine Chitosan Powders in Modification of Calcium Alginate Porous Materials[D]. Wuhan: Wuhan Textile University, 2014.
[25] ZHAO H Y. Design, synthesis and characterization of novel porous organic frameworks based on cyanuric chloride[D]. Changchun: Jilin University, 2011.
[26] YIQI L, JONATHAN R T, MITA D. Metallothermic reduction of silica nanoparticles to porous silicon for drug delivery using new and existing reductants[J]. Chemistry, 2018, 24(31):7913-7920.
[27] ZHAO Y, XU W, YAO A H, et al. Porous hydroxyapatite microspheres formed by a situ conversion process[J]. J Funct Mater, 2010, 41(7):1124-1126.
[28] HUANG F F. Preparation of porous hydroxyapatite and the properties of drug delivery in vitro[D]. Xi′an: Shaanxi University of Science and Technology, 2012.
[29] WANG X P, SONG J, CUI J J. Progress in biomimetic synthesis of porous materials[J]. Chin J Bioproc Eng, 2019, 17(6):597-603.
[30] JUAN M M, YAIZA B, CRISTINA M R, et al. Quantifying the surface properties of enzymatically-made porous starches by using a surface energy analyzer[J]. Carbohydr Poly, 2018, 200:543-551.
[31] CUI R Y. Fabrication of porous MnOx/SiO2 from cabbage leaf cells and their applications[D]. Suzhou: Suzhou University of Science and Technology, 2017.
[32] CHEN G Y. Preparation of metallic oxide micro/nanomaterials by biotemplates and the investigation of their properties[D]. Guangzhou: South China University of Technology, 2017.
[33] WU W Q, JIAO A Q, YANG Y Y, et al. Study on preparation of porous starch by reactive extrusion combined with enzymolysis[J]. Sci Technol Food Ind, 2020:1-11.
[34] ZHAO J. Study on Property of Adsorption and Slow-release for Microporous Corn Starch[D]. Xi′an: Northwest University, 2014.
[35] TAMJID E, BOHLOULI M, MOHAMMADI S, et al. Sustainable drug release from highly porous and architecturally engineered composite scaffolds prepared by 3D printing[J]. J Biomed Mater Res, 2020, 108(6):1426-1438.
[36] JAKUS A E, GEISENDORFER N R, LEWIS P L, et al. 3D-printing porosity: a new approach to creating elevated porosity materials and structures[J]. Acta Biomater, 2018, 72:94-109.
[37] ESQUIVEL-CASTRO T A, IBARRA-ALONSO M C, OLIVA J, et al. Porous aerogel and core/shell nanoparticles for controlled drug delivery: a review[J]. Mater Sci Eng C Mater Biol Appl, 2019, 96:915-940.
[38] YANG M. Preparation of long-range ordered porous materials through ice-templating method[D]. Hangzhou: Zhejiang University, 2017.
[39] JIANG H, ZHANG D K, HAN X, et al. Research progress of solid dispersion of porous material as carrier to improve the dissolution rate of poorly water-soluble drugs[J]. Chin Pharm J(中国药学杂志), 2017, 52(17):1477-1482.
[40] XU X M, LI J H. Characteristics of porous materials and their application in pharmacy[J]. China Mod Med(中国当代医药), 2009, 16(12):21-23.
[41] LIU J L, PAN C Y, YU G P, et al. Application research progress of porous materials in drug delivery[J]. Guangzhou Chem Ind(广州化工), 2013, 41(13):42-44.
[42] TANG C. Preparation and applications of drug-loaded porous polymer matrices using supercritical solution impregnation[D]. Hangzhou: Zhejiang University, 2014.
[43] ZHANG D K, FU C M, LIN J Z, et al. Study on theory and application value of "unification of medicines and excipients" in Chinese materia medica preparations[J]. Chin Tradit Herb Drugs(中草药), 2017, 48(10):1921-1929.
[44] JANG Y R. Study on the optimization technology and quality criterion of Xin Yue Shu tablet by powder property[D]. Nanjing: Nanjing University of Chinese Medicine, 2013.
[45] LIU H Y. Preparation of novel vitamin A tablets using hydroxyapatite[D]. Changchun: Jilin University, 2018.
[46] MA L L, LI S X, TENG J L. Study on solidifying clove volatile oil with microporous starch[J]. Pharm Clin Res(药学与临床研究), 2014, 22(1):47-49.
[47] TIAN J J, YU Y T, ZHAO L J, et al. Mesoporous silica solidifying volatile oil from Bupleuri radix and Forsythiae fructus and its micromeritic properties[J]. Acta Pharm Sin(药学学报), 2019, 54(8):1493-1501.
[48] ZHAO X, MA T T, TIAN Y Y, et al. Effects of activated sites in porous aromatic frameworks PAF-1 for drug loading and release[J]. J Nat Sci Heilongjiang Univ(黑龙江大学自然科学学报), 2019, 36(2):178-186.
[49] LIU Y H, MA Y N, WANG W P. Konjac glucomannan superporous hydrogel hybrids matrine sustained-release capsules: preparation and release evaluation in vitro[J]. J Ningxia Med Univ(宁夏医科大学学报), 2012, 34(10):1035-1038.
[50] ZHU L F. An inhaled oridonin-loaded porous microparticle for the local treatment of primary non-small cell lung cancer[D]. Hefei: Anhui Medical University, 2016.
[51] LIU L L, QIAN G M, XU Z X. Preparation of porous nano-hydroxyapatite and the slow release property of AM-HAP[J]. China Powder Sci Technol(中国粉体技术), 2018, 24(5):40-47.
[52] ZHAO X, MA T T, TIAN Y Y, et al. Effects of activated sites in porous aromatic frameworks PAF-1 for drug loading and release[J]. J Nat Sci Heilongjiang Univ(黑龙江大学自然科学学报), 2019, 36(2):178-186.
[53] ZHOU Q, PANG J Y, TAN D F, et al. Preparation and properties research of CS/PLGA slow-release composites loading azithromycin[J]. Chem Res Appl, 2018, 30(9):1511-1515.
[54] ZHANG W Y. Synthesis, optimization and characterization of paclitaxel-loaded PLGA porous microspheres for cancer therapy[D]. Yangzhou: Yangzhou University, 2017.
[55] WANG X Y, YAN H S. Methotrexate-loaded porous polymeric adsorbents as oral sustained release formulations[J]. Mater Sci Eng C, 2017, 78:598-602.
[56] GAO B, SUN Z S, ZHI Z Z, et al. Preparation of two poor water soluble drugs-nanoporous ZnO solid dispersions and the mechanism of drug dissolution improvement[J]. Acta Pharm Sin(药学学报), 2011, 46(11):1399-1407.
[57] YAN H M, JIA X B, ZHANG Z H, et al. Study on porous starch as solid dispersion carrier of total epimedium flavonoids[J]. China J Chin Mater Med(中国中药杂志), 2015, 40(9):1723-1726.
[58] YAO D. A drug delivery system based on glucose sensitive porous microspheres/polymer hybrid hydrogels[D]. Tianjin: Tianjin University, 2017.
[59] HUANG H, DU M, CHEN J, et al. Preparation and characterization of abalone shells derived biological mesoporous hydroxyapatite microspheres for drug delivery[J]. Mater Sci Eng C Mater Biol Appl, 2020, 113:110969.
[60] ZHANG H. Magnetic targeting drug delivery system based on magnetic porous carbon nanospheres[D]. Taiyuan: Taiyuan University of Technology, 2017.
[61] OMIDIAN H, ROCCA J G, PARK K. Elastic, superporous hydrogel hybrids of polyacrylamide and sodium alginate[J]. Macromol Biosci, 2006, 6(9):703-710.
[62] MA Y N, HAN X, SUI H, et al. Influence of fenugreek gum and its modified materials on disintegration and dissolution properties of hydrochloride berberine tablet[J]. Chin Tradit Pat Med(中成药), 2012, 34(3):446-450.
[63] LIU W, DU P, QING Y, et al. Pharmacodynamics and mechanism of Shaoyao Gancao Intragastric Floating Tablets based on unification of medicines and excipients[J]. Chin Tradit Herb Drugs(中草药), 2019, 50(3):647-652.

基金

国家重点研发计划“中医药现代化”专项项目资助(2017YFC1702900); 国家自然科学基金项目资助 (82003953); 中国博士后科学基金资助项目(2019M662278); 江西省自然科学基金项目资助(20202BAB216039); 江西省教育厅科学技术研究项目资助(GJJ190688); 江西省博士后科研项目择优资助(2019KY42); 江西省博士后日常资助(2020RC15); 江西中医药大学校级课题资助(2004/538200010402)
PDF(1497 KB)

Accesses

Citation

Detail

段落导航
相关文章

/